FRITZ!Powerline 546E – Service - Knowledge Base

FRITZ!Powerline 546E – Service
Not your product?

FRITZ!Powerline is not displayed as a smart home device in the FRITZ!Box user interface

FRITZ!Powerline is not displayed under "Home Network > Smart Home" in the FRITZ!Box user interface. As a result, you cannot use the FRITZ!Box user interface to change the settings for the socket.

Requirements / Restrictions

  • FRITZ!OS 6 or higher is installed on the FRITZ!Box.
  • In order to display FRITZ!Powerline as a smart home device in the FRITZ!Box user interface, a FRITZ!Box with a DECT base station, except for FRITZ!Box 7312 and FRITZ!Box 7412, is required.

    Note:If FRITZ!OS 6 is not available for your FRITZ!Box model, or you are using a FRITZ!Box without a DECT base station, or if you are using a FRITZ!Box 7312 or 7412, you can only use the FRITZ!Powerline user interface to configure the socket.

Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for FRITZ!Powerline.

1 Installing the latest FRITZ!OS

2 Enabling the smart home function in the FRITZ!Box home network

In order for the FRITZ!Powerline adapter to be displayed under "Smart Home" in the FRITZ!Box user interface, you must enable the corresponding option in the FRITZ!Powerline user interface:

  1. Click "Smart Home" in the user interface of FRITZ!Powerline.
  2. Enable the option "Share the smart home function in the FRITZ!Box home network".
  3. Click "Apply" to save your settings.