FRITZ!Box 7360 – Service - Knowledge Base
Pin assignment of cables, adapters and ports
Your FRITZ!Box came with various cables and adapters to connect it to the DSL line and connect your telephony devices to the FRITZ!Box.
Note:The FRITZ!Box is available in several different product variants, each of which is delivered with different components. For the exact contents of the package, see the information printed on the FRITZ!Box packaging.
1 DSL/telephone cable (Y cable)
The cable wires for DSL lead from the middle pins 4 and 5 of the plug on the single cable end to the middle pins 4 and 5 of the (gray) DSL plug at the split end of the cable (see fig.).
Note:If you hold an RJ45 plug so that the cable is hanging down and the golden pins are showing upwards and towards you, pin 1 is on the right-hand side, and pin 8 on the left-hand side.
The cable wires for landline telephony (analog) lead from pins 3 und 6 of the plug on the single cable end to pins 3 and 4 of the black telephone plug at the split end of the cable (see fig.).
Fig.: Pin assignment of the DSL/telephone cable
2 RJ11 socket of "FON" extension
The RJ11 socket "FON" located on the back panel of the FRITZ!Box only uses the two middle pins.