FRITZ!DECT Repeater 100 – Service - Knowledge Base
The temperature displayed by FRITZ!DECT Repeater is incorrect
Incorrect temperature values are displayed for FRITZ!DECT Repeater and/or several FRITZ!DECT Repeaters display values that differ greatly.
Note:The configuration procedure and notes on functions given in this guide refer to the latest FRITZ!OS for your FRITZ!Box.
Simply proceed as described below. After each measure, check whether the issue persists.
1 Finding the ideal location for the FRITZ!DECT Repeater
- Plug FRITZ!DECT Repeater into a wall outlet.
- Make sure the ventilation slits are not covered, that the device is not exposed to direct sunlight, and that it is not located directly next to a heater.
- Remove any possible sources of heat in the vicinity of the device (for example other electrical devices that radiate heat).
2 Correcting a temperature offset
The temperature measured on the device can deviate greatly from the actual room temperature, for example when the device is next to a heater or behind a curtain. Set the offset so that your smart home device accounts for such deviations:
- Click "Home Network" in the FRITZ!Box user interface.
- Click "Smart Home" in the "Home Network" menu.
- If available, select the option "All smart home devices" in the drop-down list "viewing".
- Click the button (Edit) or the button (General) for the respective device.
- Click "Additional settings".
- Under "Temperature offset", enter the value (in degrees Celsius) by which the measured value is to be corrected, for instance 2.0 or -2.0.
- Under "Temperature offset", set the actual room temperature by clicking the plus or minus.
- Click "OK" to save the settings.