Vous trouverez des mises à jour gratuites pour votre produit FRITZ! dans la zone de téléchargement. Choisissez votre produit et profitez des nouvelles fonctions mises au point par notre équipe de développement. Ces contenus sont disponibles en anglais et en allemand.
Info on FRITZ!Box 7560
The update file "FRITZ.Box_7560.149.xx.xx.image" on ftp.avm.de contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 7560.
Attention: This update file is only intended for use with FRITZ!Box 7560! Please follow the instructions at the end of this file to install the update.
Product: FRITZ!Box 7560 Version: FRITZ!OS 7.01 Language: English, French, German, Italian, Polish, Spanish Release date: 09.10.2018
- New functions and improvements for Mesh
- New features for the FRITZ! Hotspot
- MyFRITZ! access to FRITZ!Box via internet now comes without security information in the browser
- Increased speed when using USB storage media with NTFS data systems
- Support for DECT-ULE/HAN-FUN, the manufacturer-independent standard for Smart Home devices
- New features for FRITZ!Fon devices
- Schedule for call diversion: configure once so that you can always be reached
- Transmit telephone numbers to additional FRITZ!Boxes
- Support for Telekom SIP Trunking
Note: Instructions for configuring and using Mesh functions are presented at en.avm.de/mesh-faq
Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version.
New Features in FRITZ!OS 7.00
- NEW register for regular status updates for your FRITZ!Box (MyFRITZ! report)
- NEW MyFRITZ! internet access to the FRITZ!Box without a warning from the browser (SSL certificate from Let's Encrypt)
- NEW The FRITZ!Box configured as Mesh Master transfers your telephone numbers to an additional FRITZ!Box as a Mesh Repeater.
- NEW Scheduling function for call diversion
- NEW Telephone numbers can be blocked or added to your contacts directly from the call list
- NEW Support for Deutsche Telekom SIP Trunking (DeutschlandLAN SIP Trunk / SIP Trunk Pooling)
- NEW FRITZ!Fon phone number display shows region and country area codes
- NEW Now five different ring tones of your own can be selected for FRITZ!Fon
- NEW FRITZ!Fon start screen event log: received faxes are displayed
- NEW FRITZ!Fon Smart Home start screen now scrollable to display more Smart Home devices
- NEW Expanded registration mode for (re-)registration of all devices known to the FRITZ!Box, for instance, after switching to a new FRITZ!Box
- NEW FRITZ!Box supports software updates for compatible handsets from other manufacturers (CAT-iq SUOTA)
- NEW FRITZ!Fon supports updates for FRITZ!Box (can also be protected with a PIN)
- NEW Separate volume controls for the alarm sound
- NEW FRITZ!Fon media player: save and load playlists as .xsfp files via FRITZ!NAS
- NEW Jump to next/last title when playing podcasts on your FRITZ!Fon
- NEW Support for Speedphone 11 from Deutsche Telekom
- NEW User interface with new Home Network -> "Mesh" menu for all settings concerning Mesh
- NEW Mesh Home Network Overview also shows telephone and Smart Home connections complete with topology and connection quality
- NEW In the ex works settings, a second FRITZ!Box connected via Ethernet becomes a Mesh repeater at the push of a button (WPS)
- NEW Switch for IP client or router operation in the network settings area
- NEW Switch for the function of the FRITZ!Box in the home network (Mesh operating mode) as Mesh Master or Mesh Repeater in the Home Network>Mesh>Mesh Settings and WLAN areas
- NEW Mesh events added to the event messages
- NEW The settings for push services, auto updates and AVM services are applied to the entire Mesh WiFi
More information on the new features for Mesh is presented at "New features for Mesh" More information on configuration and using Mesh is presented at en.avm.de/mesh-faq
- NEW With a "FRITZ! Hotspot it's easier than ever to give guests WiFi access in public places such as bars, restaurants, doctor's practices etc. For details, see Wireless / Guest Access.
- NEW Improved wireless security through support of activated Protected Management Frames (PMF)
- NEW Support for DECT ULE/HAN FUN
With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices.
Additional improvements in FRITZ!OS 7.01
- Fixed Datarates shown at different places in the user interface have not always been identical
- Fixed possible interop problem when using G.INP and SRA on ADSL lines
- Fixed Online-Monitor was not showing downloads from Wifi-Guest devices correctly
- Fixed On the MyFRITZ!-page of the FRITZ!Box (myfritz.box) changing the user-mail-adress was offered, even if no user was logged in
- Fixed wrong display on DSL-Settings after recovering of Powerline-settings
- Fixed Importing vpn settings failed in certain scenarios
- Fixed Creating a vpn-user with NAS-rights required double confirmation
- Changed global filter settings now include Windows proxy detection
- Improved added unique name to FRITZ!Box in Mesh Repeater mode
- Fixed wrong display of Mesh-Overview in Edge browser
- Fixed Smart home devices did not show on a Mesh Repeater's user interface
- Fixed Google authenticator: setup did not work with space in name
- Fixed Diagnostic - Security page did not show when language was set to english
- Fixed Missing entries in diagnostic page when using UTML-fallback
- Fixed missing error message when Smart home device with empty battery detected
- Fixed new voice messages could not be played on myfritz.box when using iOS or macOS
- Fixed when setting up call forwaring the wrong options were greyed out
- Fixed when setting up a new telephone number going back was impossible after failed test
- Fixed setting up new sip numbers was not possible when country was set to Italy
- Fixed it was impossible to edit an existing SIP number
- Fixed some IP phones could not register after update to FRITZ!OS 7 ('422 Session Intervall too Small')
- Improved Connection of Wifi-repeater with activated protected management frames (PMF)
- Improved Stability
- Fixed When changing operation mode to "repeater" the Wifi LED would continiously flash
- Fixed removed "inspecting chanel" in description of 2.4Ghz Wifi monitor graphic (Zero Wait-DFS only exists on 5 Ghz)
- Fixed problem when changing WLAN-coexistence setting in Mesh repeater mode
- Fixed wrong access type was shown when in Mesh repeater mode
- Fixed possible problems when reenabeling 2.4Ghz radio
- Fixed in some cases the connection would break, when chaning encrypten in bridge mode
- Fixed after updating to FRITZ!OS 7.00 auto-channel was reactived in some cases
- Fixed System - Eventlog did some times show wrong data rate
- Fixed guest access did not work on Mesh repeater after Wifi was restarted on the mesh master
- Fixed when playing media via the FRITZ!NAS media player, playback stopped after 20 minutes
- Fixed missing error message when trying to play incompatible media file
- Fixed in mobile view it was impossible to change or delete shares
- Fixed wrong DSL status display in fallback mode
- Fixed connection status was wrong with activated tethering
- Fixed wrong presentation while detecting and optimizing powerline interference with VDSL
Additional improvements in FRITZ!OS 7.00
- IMPROVED Option for checking and, if necessary, remedying detected interference from powerline to VDLS
- IMPROVED Display of internet connections on the Overview page also includes WAN connections
- IMPROVED Simplified display for internet connections on the Overview page under Connections
- IMPROVED Function for removing the FRITZ!Box from the MyFRITZ! account (myfritz.net)
- IMPROVED Optimizations for data throughput
- IMPROVED Optimizations for DNS resolution
- Improved Optimized registration with MyFRITZ! (myfritz.net) also possible without enabling MyFRITZ! internet access, under Internet > MyFRITZ! Account
- *IMPROVED** SHA-2 support for VPN connections
- IMPROVED Filter for port 25 (unsecured mail sending) also effective for the Guest Access (Wireless LAN/LAN)
- CHANGE Connections to 1&1 lines also with Internet Protocol version 6 (IPv6 and IPv4 Dual Stack)
- CHANGE Connections to Vodafone lines also with Internet Protocol version 6 (IPv6 and IPv4 Dual Stack)
- CHANGE Type of internet connection "existing connection via wireless LAN" also supports non-encrypted wireless LAN
- CHANGE Parental controls no longer differentiate between Windows users
- CHANGE Devices blocked for internet use in the parental controls can be reached via VPN
- CHANGE Internet service provider "GMX" removed
- CHANGE FRITZ!Box devices in IP client mode (as for connection to existing network) can be registered with myfritz.net
- CHANGE Certificate signed by letsencrypt.org (for MyFRITZ! addresses)
- BUG FIX "Default user already exists" message when configuring parental controls
- BUG FIX Possible circumvention of time limits defined in parental controls
- BUG FIX Circumvention of parental controls for certain blocked websites
- BUG FIX The LAN ports were switched for VPN LAN-LAN linkup
- BUG FIX Improved VPN interoperability
- BUG FIX VPN user connections not displayed in the home network overview
- BUG FIX MyFRITZ! FTP links corrected
- BUG FIX MyFRITZ! access or device with MyFRITZ! access could not be deleted under certain circumstances
- BUG FIX Error while entering an already assigned IP address for a new device for port sharing
- BUG FIX No IPv4 port sharing for devices with IPv6 interface ID during IPv4 internet connection without IPv6
- BUG FIX IPv6 NAS sharing link could not be used
- BUG FIX Google DynDNS service not supported
- BUG FIX Static IP address with /31 network mask not possible
- IMPROVED Redesigned administration of call blocks for incoming calls (telephone numbers)
- IMPROVED Optimized management of telephone books
- IMPROVED Playback of web radio and podcasts with HTTPS addresses on AVM devices (only if contents can be played back without encryption)
- BUG FIX Speedphone 500 could no longer make calls
- BUG FIX Possible error message (Error code 1) when IP address entered manually in the Device Details
- CHANGE Connection Statistics area for the powerline network moved from the Network Device Details to the Contents>FRITZ!Box Support area
- IMPROVED Band steering for wireless clients that support the 802.11v/k standards
- IMPROVED Display of wireless standards 802.11k and 802.11v as "Signal Properties" (for band steering)
- IMPROVED Display of frequency bands on Wireless LAN / Radio Channel page in the "Other radio networks in your vicinity" list
- IMPROVED Improved changing of SSID in Wireless Assistant during first configuration
- BuG FIX Selection of DFS channels in the 5 GHz band possible again in repeater mode
- BUG FIX Display of interference sources on Wireless LAN / Radio Channel page in the "Use of the Wireless LAN Channels" list
- BUG FIX The entire network environment of the base station is displayed in repeater mode
- IMPROVED Support for external temperature sensor to determine room temperature
- IMPROVED Push notification sent when an interrupted DECT connection is restored
- IMPROVED Error while saving Smart Home Device names
- CHANGE The "Login without password (not recommended) option in the FRITZ!Box user interface now requires pressing a button on the FRITZ!Box
- IMPROVED Function diagnostics shows insufficient memory for saving faxes and voice messages when USB storage is full
- CHANGE Display of port for Diagnostics & Maintenance
- NEW Additional confirmation for certain changes can now be performed using the Google Authenticator
- IMPROVED Redesigned Auto Update page
- IMPROVED Event protocol on the Mesh Master also contains all events on the other FRITZ! devices in the Mesh WiFi
- IMPROVED Push service sends mail after the update with additional information on the version and update progress
- IMPROVED Push service change notice now also includes information on the registration of a new DECT device
- IMPROVED Push service change notice on new devices in the home network now also includes information on new Mesh repeaters
- IMPROVED "New FRITZ!OS" push service mail now also includes planned time of for auto updates
- IMPROVED Optimized time synchronization (NTP) after internet dial-in
- IMPROVED Consent to "Diagnostics and Maintenance" does not include permission for software updates
- IMPROVED Simplified display for configuration of wireless LAN, LAN and WAN in the Interfaces area of the Overview menu
- IMPROVED Redesigned push services overview
- CHANGE For security reasons, the preconfigured user "ftpuser" can no longer be granted access from the internet
- CHANGE For FRITZ!Box users who are granted access from the Internet, the password must be different from the user name
- CHANGE The security of new password assignments must be rated at least "medium" or they will be rejected.
- CHANGE Additional confirmation for creating VPN connections
- *IMPROVED** Message notifying about possible detriment to FRITZ!Box functions when contents deleted from the FRITZ! folder
- BUG FIX System folders no longer indexed for the FRITZ! media server
- BUG FIX Internet via mobile network not offered for all detected 3G dongles during first configuration
New features for Mesh
General information on Mesh is presented at en.avm.de/mesh-networking.
Enabling the Mesh Function
To check whether a FRITZ! product is enabled for Mesh, see the Mesh Overview of the FRITZ!Box (the Mesh Master) under "fritz.box -> Home Network -> Mesh". Here the products in the Mesh are designated with a corresponding "Mesh active" symbol.
A FRITZ!WLAN Repeater or FRITZ!Powerline Adapter with FRITZ!OS 6.90 or higher installed can be enabled for Mesh in various ways:
- If the product has the ex works settings configured and is being connected with the FRITZ!Box for the first time, it will be automatically enabled for Mesh.
- If the product is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box. On the FRITZ!Box, use the button that initiates WPS (depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS button for 6 seconds)
Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq.
Telephony Mesh and Smart Home Mesh
With FRITZ!OS 7.0, telephony and Smart Home are also compatible with the Mesh.
The connections of cordless telephones and Smart Home products are displayed in the FRITZ!Box Mesh Overview. You can use a second FRITZ!Box as Mesh repeater, and use telephones registered with the second FRITZ!Box with the numbers assigned in the first FRITZ!Box, the "Mesh Master".
Configuring a second FRITZ!Box as a Mesh repeater with the press of a button
- Your existing FRITZ!Box supports Mesh (FRITZ!OS 6.90 or higher). This box is the Mesh Master.
- The FRITZ!Box to be deployed as a Mesh repeater has been updated to FRITZ!OS 7.0 and you have restored its settings ex works. This box is to become the Mesh repeater.
- Connect the LAN1 port of the Mesh repeater with the Master using a LAN cable
- Initiate the Connect function on both boxes (7590: press the "Connect" button briefly; 7490: press and hold down the WLAN/WPS button for 6 seconds)
After the connection procedure is concluded, the second FRITZ!Box is ready for operation as a Mesh repeater. (It operates in "IP client" mode and, as a Mesh repeater, adopts the wireless LAN settings and other important settings from the FRITZ!Box).
Please note that this function can be used only if the second FRITZ!Box is permanently connected with the first box by LAN cable.
Instructions for configuring a FRITZ!Box connected via wireless LAN as a Mesh repeater are presented at en.avm.de/mesh-faq
Transmit the telephone numbers of a Mesh Master to another FRITZ!Box in the home network
Once you have added an additional FRITZ!Box to the Mesh, you can configure it so that all telephone numbers are available on each FRITZ!Box. If your FRITZ!Box is connected with a landline, you can use the telephones connected to the second FRITZ!Box to make calls over the internet as well as on the landline. If the latest FRITZ!OS 7.0 is installed on both FRITZ!Boxes, the telephone numbers are transferred automatically in the Mesh once the "Telephony in the Mesh" option is enabled.
If the new FRITZ!Box is already part of the Mesh, or if you have already set up telephone numbers there, these telephone numbers must be deleted and one of the two FRITZ!Boxes must be restarted.
Then the new FRITZ!Box must be enabled for "Telephony in the Mesh". To do so proceed as follows:
- Click on "Home Network" in the user interface of the Mesh Master.
- Click on "Mesh" in the "Home Network" menu.
- Click on the "Mesh Settings" tab.
- In the "Use Telephony in the Mesh" section, click on the "Enable" link next to the Mesh repeater in question and then confirm this operation on the Mesh Master as well, if prompted to do so.
The telephone numbers are now distributed in the Mesh and can be assigned to your telephones and other terminal equipment for telephony (for instance, answering machines) on the FRITZ!Box.
Note: Telephony Mesh is not the same thing as DECT repeating, which requires the support of special hardware on the FRITZ!Box deployed as the Mesh Master. If you would like to use DECT repeating, you can purchase the FRITZ!DECT Repeater 100 from an electronics retailer.
Display of 802.11k and 802.11v support on wireless devices
FRITZ!OS now displays wireless devices that support the wireless standards 802.11k and 802.11v directly in the user interface. Both standards are already widespread for wireless devices and are important prerequisites for the further development of Mesh WiFi for the fastest, lowest-interference, and most convenient control of wireless devices in Mesh environments To find out whether your wireless devices offer support for the 11k and/or 11v standards, see the "Properties" under the Wireless / Radio Network menu, or use the "Edit" function to display the properties of each wireless device.
Additional Innovations in FRITZ!OS 7.0
What's new for the FRITZ! Hotspot
The new FRITZ!OS 7.0 vmakes setting up and using the FRITZ! Hotspot even easier. It's now even easier for users to choose whether the wireless guest access should be provided as an open hotspot, or encrypted as a private hotspot. If an open hotspot is chosen, the guests do not need to enter a security key. Cafés, doctor's offices and small businesses, as well as all FRITZ!Box users, can provide their customers and visitors an easy-to-use internet access that complies with the current legal regulations. Whether it's private or public hotspot, guests cannot access the home network, but surf using a second wireless LAN provided by the FRITZ!Box.
Secure and Complete Control
The operator of the hotspot can decide which applications can be used in the guest network and which are prohibited. Daily email messages notify the operator of the hotspot about which devices were registered in the radio network and when. Another advantage is the option to reserve bandwidth. This options allows you to specify how much of the data rate is reserved for their own wireless LAN and how much is available to their guests.
Individual & Convenient
Increased speed when using USB storage media with NTFS data systems
If you're using USB sticks or flash drives on your FRITZ!Box that are formatted with the data system NTFS, you can benefit from increased speed during transmission. You don't have to do anything - just continue to use the existing USB storage media as before. To check what data system is used, go to Home Network -> USB Storage Media in the FRITZ!Box user interface.
New security feature in the wireless LAN: "Protected Management Frames (PMF)"
FRITZ!OS now supports additional security during registration of devices with the wireless LAN. "Protected Management Frames" ("PMF" for short) offer additional protection for the wireless connection during the setup phase. PMF is standardized according to IEEE 802.11w-2009 and is automatically offered to or negotiated with wireless devices that support this technology. The new feature is available in the user interface under Wireless > Security > Additional Security Settings.
Support for Telekom SIP Trunking
With FRITZ!OS AVM 7.0 provides support for the SIP trunking technology from Deutsche Telekom. For a few months now, Deutsche Telekom has been offering its business clients a SIP Trunk standard, making it easy to switch from ISDN to IP-based ports. The FRITZ!Box supports up to 20 direct inward dialing (DID) numbers for telephones connected directly to the FRITZ!Box. If a user's phone tariff contains more than 20 direct inward dialing numbers, these can be used with an ISDN PBX (Private Branch Exchange) for the system connection via the FRITZ!Box's internal S0 interface. With FRITZ!OS 7.0, the FRITZ!Box supports the "Deutschland LAN SIP Trunk" and "Deutschland LAN SIP Trunk Pooling" tariffs.
Detailed configuration instructions are presented in the following guide:
MyFRITZ! access to your FRITZ!Box via internet now without security messages in the browser
When you access the user interface of your FRITZ!Box from the internet, a security warning may be displayed in the browser. The new FRITZ!OS version enables your FRITZ!Box to receive a SSL certificate for your MyFRITZ! address from the organization letsencrypt.org. Browser access via the MyFRITZ! address to the interface of FRITZ!Box is no longer accompanied by a security warning, since most browsers trust the certificates from letsencrypt.org.
Proceed as follows:
- First you need to register your FRITZ!Box with MyFRITZ! (myfritz.net).
- Under "Internet / MyFRITZ! Account", enable the "Let's encrypt" optLet's Encryption.
- Confirm by clicking "Apply" and wait for the status "Certificate issued successfully".
Your FRITZ!Box has the certificate created for your MyFRITZ! address and uses it for browser access to this address, for example when you access your FRITZ!Box via your account on https://myfritz.net.
It's also possible to send links for FRITZ!NAS file sharing (for example photos) to third parties, who'll have access without annoying certificate warnings. This way, FRITZ!NAS becomes an even greater alternative to cloud storage services.
Note: To receive the certificate, the TCP port 443 of your FRITZ!Box is open for a few minutes. The certificate is currently valid for 60 days and is then renewed by the FRITZ!Box. HTTPS access to your FRITZ!Box via public or local IP address, "fritz.box" in the home network or over a DynDNS provider do not use the certificate from letsencrypt. MyFRITZ!App: After activation of the Let's Encrypt certificate in the FRITZ!Box, the MyFRITZ!App notifies you once about the change of the certificate fingerprint. Select "trust" to continue using the new certificate.
Option for assessing and, if necessary, remedying detected interference with VDSL from Powerline
In the Internet / DSL Information / Interference Resistance menu of the FRITZ!Box, any interference with VDSL that may have been caused by FRITZ!Powerline can be minimized. This process of checking and adjusting can take up to ten minutes. During this time, the load on the powerline connection may affect the network quality and internet connection. This procedure can be repeated to optimize the interaction of VDSL with a high-performance powerline installation step by step, and the adjustmented settings can be returned to their original configuration.
This option is available only if VDSL interference was detected that could have been caused by a FRITZ!Powerline product.
Support for DECT ULE/HAN FUN
DECT-ULE/HAN-FUN is a manufacturer-independent standard for Smart Home devices.
The following sensors passed testing with FRITZ!OS 7.0 to confirm that they work with HAN-FUN:
- SmartHome wall switches (https://www.smarthome.de/geraete/telekom-smarthome-wandtaster)
- SmartHome door/window sensor (https://www.smarthome.de/geraete/eurotronic-smarthome-tuer-fensterkontakt-optisch)
- SmartHome motion detector (https://www.smarthome.de/geraete/telekom-smarthome-bewegungsmelder-innen) Please note: The HAN-FUN devices are not supported by DECT repeaters. Other types of sensors can also be used as long as their manufacturers have declared them to be compatible with DECT-ULE/HAN-FUN. Actuators from the Telekom SmartHome product range are not supported at this time (e.g., InDoor/OutDoor adapter plugs, sirens).
Used in combination with a FRITZ!Box and the FRITZ!DECT 200/210 smart plug, they can be used to realize the following scenarios:
- Press wall switch => Outlet is switched => Light on/off
- Motion sensor triggered => Light on in the home/garage/yard
- Window sensor open/closed switches FRITZ!DECT 200 => connected humidifier / air purifier switches off/on
Please note during installation: The Telekom app cannot be used to install SmartHome devices to be deployed with a FRITZ!Box. The HAN-FUN devices are connected (paired) with the FRITZ!Box via the DECT button. In addition to the AVM Smart Home devices, a maximum of ten HAN-FUN devices can be registered with a FRITZ!Box.
After successful DECT pairing, the new devices are listed in the FRITZ!Box user interface (Home Network => Smart Home) as "HAN-FUN function xxx" and their properties can be configured accordingly.
Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers.
Support for Speedphone 11 from Deutsche Telekom
With FRITZ!OS 7.0 it is possible to use a Speedphone 11 with advanced telephone functions with a FRITZ!Box. For this the software of the Speedphone 11 must be updated.
Please note: At the time of publication in July 2018, a corresponding update was forthcoming.
If the firmware version 4.01 is installed on your Speedphone 11, perform the following steps:
- Register the Speedphone 11 with the FRITZ!Box according to these instructions, during which the expanded security functions of the FRITZ!Box will be disabled briefly: https://avm.de/service/fritzbox/fritzbox-7590/wissensdatenbank/publication/show/3288_Speedphone-nach-Neustart-der-FRITZ-Box-abgemeldet/
- If a new Speedphone firmware is available for updating, it will be offered automatically. Alterntively, you can perform a manual check via the menu.
- Once the firmware has been updated (> version 4.01), the security functions disabled in step one should be reactivated in the FRITZ!Box.
- Re-register the Speedphone 11 with the FRITZ!Box.
The Speedphone 11 is now available for telephone services with DECT encryption enabled. The following features were tested successfully:
- caller ID display
- caller ID
- access to the FRITZ!Box address book
- call list
- use of the FRITZ!Box answering machine
Disclaimer: Due to the general conditions prevalent in radio technologies, as well as certain special product properties of products, AVM cannot guarantee the complete functionality of devices from other manufacturers.
Additional improvements in FRITZ!OS 6.83:
- Improved Optimization for VDSL vectoring
- Improved Better interoperability with various VDSL and ADSL connections
- Improved Compatibility mode added for VDSL connections with supervectoring (35B)
- Improved Display of online time in the parental controls overview
- Improved Labeling of time axes in the Online Monitor
- Improved Filters for websites take account of blocked domains for https calls as well
- Improved Support for pure IPv6 devices in parental controls
- Improved Port sharing combined with MyFRITZ! sharing and IPv6 sharing
- Improved Complete firewall exceptions possible for downstream routers with IPv6
- Improved Static routes can be defined for IPv6
- Bug fix Shifted time scale in the graphic overview of permitted online time on fritz.box/surf.lua
- Improved changes for the telephony service of Deutsche Telekom
- Fixed setting up login credentials for a seperate logical connection for voice
- Changed setting up IP-phones requires at least 8 characters for the username
- Changed connecting IP-phones over the internet is deactivated after installing the update *
- Improved Optimized position of group filter in the configuration wizard for Google contacts
- Bug fix Impaired voice quality on some analog telephone lines
- Bug fix Integration of a new Google telephone book now possible
- Improved Entries in the telephone book now can be sorted by first and last name
- Improved Random playback of music list now works across sub-folders
- Improved Podcasts can now be interrupted on the FRITZ!Fon (by the user or by incoming calls) and resumed at the point of interruption
- Improved Display of device details completed Resoved - "Deleting" unused devices in the home network list also removesVPN connections
- Changed LAN port 1 through 4 switched to power mode
- Fixed performance issue when using DSL connections with DHCP
- Improved Shows the time when autochannel was last refreshed
- Improved Deletion of all inactive wireless devices without individual settings from the list of known wireless devices
- Improved Additional options to prevent manual switching of FRITZ!DECT 200 smart plug
- Improved Diagnostics of "Function" and "Security" includes MyFRITZ!
- Improved Optimized registration of MyFRITZ! account
- Improved Attempts to log in with wrong user data recorded in Event Log
- Improved Access via FTPS supports ECDHE ciphers
- Changed Registeration with FRITZ!Box user interface valid for 20 min
- Changed Increased security of FRITZ!Box's own certificate through signature with SHA 256
- Improved changed text in the dialog for addition authentification
- Improved Optimized configuration of switching schedule by graphic time table for smartphone and tablet
- Improved FRITZ!OS update page also shows the last time the version was checked or the last time a FRITZ!OS was installed
- Improved Display of logins via FTP or SMB in the Event Log
- Improved Event log adjusted to different display sizes
- Improved User guidance for restoring saved settings
- Improved Push Service overview
- Improved Reworked mail subject line for push service mails and information about sender
- Improved Text edited in the FRITZ!Box Info mail from push service
- Improved Push service combines mails generated within a short period
- Improved Change notices for selected settings added to push service mails
- Improved Push service mail for use of guest access even when wireless network login/logout display disabled
- Improved Information on full storage medium for push service mails on fax reception, voice messages and function diagnostics
- Improved Important notifications for secure and reliable operation now also on FRITZ!Fon devices, via MyFRITZ!App 2 and by push service mail (Previously: only red Info LED and fritz.box overview)
- Improved Better stability even in atypical load situations
- Bug fix Recurrent push mails (change notices) about first registration of powerline devices or devices without a clock
- Bug fix "Change notices" and "Forgot password" mail were not sent if the push service was configured with the answering machine or the fax function
- Changed Interface descriptions for developers expanded (www.avm.de/Schnittstellen)
- Improved FTP and SMB service can be enabled/disabled independently of each other
- Changed FTP service in the home network disabled upon delivery
- Improved Optimized configuration of a mobile communications connection via Huawei E182 or ZTE W21v
- Improved Huawei E5331 and other mobile communications dongles supported in tethering mode
- Changed Access number may be left blank
*We recommend to use VPN to connect IP-phones from external locations.
Instructions for installing the update:
Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen.
(c) AVM GmbH 2018. All rights reserved.
This firmware package consists of files which are distributed under different license terms, in particular under AVM proprietary license or under any Open Source License (namely GNU General Public License, GNU Lesser General Public License or FreeBSD License). For further details see file "license.txt" (https://download.avm.de/fritzbox/license.txt). The source code of those files distributed as Open Source are available on written request to email@example.com.
Under all AVM intellectual property rights, AVM grants the non-exclusive right to personally use this AVM firmware package which is delivered in object code format only. Licensee shall olny be entitled to make a copy exclusively reserved for personal backup purposes (backup copy). AVM reserves all intellectual property rights except as expressly granted herein. Without the prior written approval of AVM and except to the extent as may be expressly authorised under mandatory law, this AVM firmware package in particular
- shall not be copied, distributed or otherwise made publicly available
- shall not be modified, disassembled, reverse engineered, decompiled or otherwise "be opened" in whole or in part, and insofar shall not be copied, distributed or otherwise made publicly available.